BuildWise · Homeowner articles
10 Questions to Ask Before Signing a Contractor Contract
By BuildWise Homeowner Advisors
A contractor contract can look reassuring because it puts a price and a start date on paper. But a signature does not fix a vague scope, an undefined allowance, or a disagreement about who is responsible for a repair discovered halfway through the job. The right questions before signing a contractor contract help you understand what you are agreeing to while there is still time to clarify it.
You do not need to know construction terminology to protect your interests. You do need a written agreement that makes practical sense: what will be done, what it will cost, what can change, and what happens if plans do not go as expected.
1. Does the contract match the proposal and the scope we discussed?
Start with the most basic comparison. The contract should reflect the proposal you reviewed, including the work areas, materials, quantities, allowances, exclusions, and price. A contract that says "renovate bathroom" leaves too much room for interpretation. A clearer scope identifies demolition, plumbing work, tile areas, fixture installation, paint, trim, cleanup, and any work that is specifically excluded.
Ask the contractor to explain any wording that differs from the estimate. Sometimes a contract is intentionally shorter than a detailed proposal, but the detailed proposal should then be attached and identified as part of the agreement. Do not rely on verbal assurances to fill in missing details.
Still choosing between proposals? Start with how to compare contractor bids side by side.
2. What is included, and what is specifically excluded?
An exclusion is not necessarily a problem. Every project has limits. The issue is discovering an exclusion after work has started, when your options are narrower and your costs may be higher.
Ask about items that are easy to assume are included: permit fees, architectural or engineering work, dumpster costs, dust protection, moving furniture, final cleaning, landscaping repair, painting, electrical upgrades, and disposal of old materials. For older homes, also ask what happens if the contractor finds concealed water damage, deteriorated framing, outdated wiring, or conditions that cannot be seen before demolition.
A good answer distinguishes between work covered by the contract and work that may require a written change order. It should not simply be, "We'll figure it out when we get there."
3. Which materials and allowances are included, and can they be substituted?
The contract should state who supplies each material and how selections will be documented. For major items, look for manufacturer, product line, model number, finish, size, or another clear description. "White subway tile" is not a complete material specification when price, quality, size, and installation pattern can vary considerably.
If you have not made every selection, ask whether the contract uses an allowance. An allowance is a budget placeholder, not a fixed material price. Find out the allowance amount, what it covers, whether sales tax is included, and how overages or unused funds will be handled.
Also ask whether the contractor can substitute materials if an item is unavailable. There are times when a substitution is reasonable, especially with supply delays. The contract should say that you receive notice and approve any change in price or appearance before the substitution is ordered or installed.
4. How is the contract price structured?
A fixed-price contract and a time-and-materials agreement place different risks on the homeowner. With a fixed price, the contractor generally agrees to complete the defined work for an agreed amount. With time and materials, your final cost depends on labor hours, material costs, and any agreed markup.
Neither structure is automatically better. A well-defined kitchen update may work well as a fixed-price project. Exploratory repair work, where opening a wall may reveal unknown conditions, may reasonably include time-and-materials work. What matters is that you understand which portions are fixed, which are allowances, and which could vary.
Ask whether the total includes applicable taxes and whether there are markups on materials, subcontractors, or change-order work. You should be able to trace the stated contract price back to the written scope.
5. How much is the deposit, and which milestones trigger payments?
Payment schedules should be tied to meaningful project milestones, not just calendar dates. A deposit, followed by payments after defined stages of work, is easier to evaluate than a schedule that requires large payments before corresponding work or materials are in place.
Ask what each payment represents. For example, does a payment follow completion of demolition, rough plumbing and electrical, installation of cabinets, or a final walkthrough? The answer should be specific enough that you can recognize the milestone when you see it.
You should also understand how payment requests will be delivered, what documentation comes with them, and whether the final payment is due only after agreed punch-list items are completed. A punch list is simply a written list of small remaining corrections or incomplete items. It is a normal part of many projects, not an accusation against the contractor.
6. What is the schedule, and what could cause it to change?
A start date and projected completion date are useful, but they are not the entire schedule. Ask about lead times for permits, materials, inspections, subcontractors, and specialty items. If your selected tile, windows, or cabinetry has not been ordered, a promised completion date may depend on factors that are still unresolved.
Ask how the contractor handles weather delays, inspection delays, owner selection delays, and unexpected conditions. The goal is not to demand a guarantee that no variable will arise. It is to set expectations for communication and decision-making when one does.
For occupied homes, ask about work hours, access, parking, restroom use, dust control, protection of finished areas, and daily cleanup. These details affect your household as much as the construction schedule does.
7. How will changes be approved and priced?
Changes are common. You may choose a different fixture, request added work, or uncover a condition that requires repair. The concern is not the existence of change orders. It is starting changed work without knowing its cost or effect on the schedule.
Ask for the change-order process in plain terms: Who prepares it? Does it show added or deducted cost? Does it state the schedule impact? Who must approve it? When is payment due?
The safest practice is simple: get changes in writing before the work begins whenever circumstances allow. A text message may help communication, but it is not a substitute for a clear written change order that both parties can refer to later.
8. Who is responsible for permits, inspections, and subcontractors?
The contract should identify who obtains permits, schedules inspections, and pays related fees. Throughout the US, requirements can vary by municipality and by the type of work involved. Do not assume that a contractor will handle permits simply because the project seems routine.
Ask whether subcontractors will be used for electrical, plumbing, HVAC, masonry, or other work. You do not need to manage the contractor's team, but you should know who is responsible for coordinating it and for correcting work if an issue arises.
It is also reasonable to ask about insurance and required licensing or registration for your location and project type. Request current documentation rather than assuming a general statement in the contract answers the question.
9. What does the workmanship warranty cover, and for how long?
A warranty should be described, not implied. Ask what workmanship is covered, for how long, how you submit a concern, and what response you can expect. Material warranties may come from the manufacturer rather than the contractor, and they may have separate conditions.
Be careful with broad language such as "guaranteed work" if the agreement does not explain what that means. A contractor cannot reasonably warrant a product defect they did not cause, just as a manufacturer warranty may not cover installation issues. Clear boundaries are more useful than a reassuring phrase.
10. What happens if there is a disagreement or the project stops?
This question can feel uncomfortable, but it belongs in the conversation before you sign. Ask how concerns will be raised, who has authority to make decisions, and what steps the parties will take if they disagree about scope, quality, payment, or timing.
Also review what the contract says about cancellation, suspension of work, termination, unpaid balances, stored materials, and dispute resolution. You are not expecting the project to fail. You are making sure both sides understand the process if circumstances change.
Read the contract as a homeowner, not as a formality
Before signing, read the full agreement alongside the proposal, drawings, selection sheets, and any written revisions. If a document is referenced, make sure you have it. If a detail matters to your budget or daily life, make sure it is written down.
Use the contractor quote guide to check the estimate behind the agreement for missing scope, exclusions, and unclear payment terms.
BuildWise Homeowner Advisors can review contractor estimates and help turn unclear language into focused questions before you commit. The contractor remains responsible for the proposal and completed work, while you retain control over the hiring decision.
A contract does not need to predict every surprise. It should give you a clear starting point, a fair process for changes, and enough detail that you can recognize whether the work you are paying for is the work you expected.
BuildWise provides advisory guidance only, not legal advice or construction supervision. Your contractor remains responsible for its work; BuildWise does not control project outcomes. Consult a qualified attorney about contract terms and local requirements.